Mapei Ultracare Grout Sealer 946 ml

Overview:

Mapei Ultracare Grout Sealer is an affordable, water-based penetrating sealer that will provide protection against most common stains for sanded and non-sanded cement grout joints. It can also be used as a pre-grouting sealer.

Features and benefits:

▪ Water-based sealer

▪ Protection against most common stains

▪ Easy to apply and will not alter the color of the grout joint

▪ For interior and exterior applications

Surface preparation:

▪ Surface must be dry and free of contaminants, including previously applied sealers, dirt, lime and hard water deposits, rust, and other heavy soil and grime.

▪ Allow new grout installations to cure for at least 48 hours before application.

▪ Surface and sealer temperature should be between 50°F and 80°F (10°C and 26°C).

Product Application:

Choose all appropriate safety equipment before use. Always test first in several inconspicuous areas and wait 24 hours to con rm desired results.

1. Avoid skin and eye contact by wearing chemical-resistant gloves and safety glasses.

2. Shake container well before using.

3. Apply an even coat with a sponge, brush or roller.

4. Allow 5 to 10 minutes for sealer to soak into surface.

5. Remove any non-absorbed sealer from the tile and grout with a clean towel. If a light residue appears, simply remove using a towel dampened with warm water.

6. If 2 or more coats are required, allow at least 30 minutes between coats and follow steps 3 through 5 for each coat.

7. The surface is ready for light traffic after 2 hours. Keep the surface dry for 12 hours.

8. For optimum protection, seal interior and exterior surfaces every 1 to 3 years.

Close container tightly after each use. Store in original container only. Store between temperatures of 35°F to 90°F (2°C to 32°C). Do not allow to freeze.

Specifications: